VERTICAL LIFT DOORS
VERTICAL LIFT DOORS
Door Engineering’s Vertical Lift door systems can be manufactured more than 100 feet wide and as tall as specified. There is flexibility in the sheeting materials, which is well suited for special architectural surface treatments. Vertical Lift doors are available in single and multi-panel configurations depending on the door size and available headroom. These systems are well suited for harsh environments such as mining and heavy equipment facilities, as well as unique applications like blast doors, pool dividers, boat storage, convention centers, high security entrances and aircraft hangars.
VERTICAL LIFT DOORS
This door system utilizes an overhead or floor mounted drive unit with counterweight support that vertically lifts and stacks the doors above the door opening. This can be operated with the counterweight or electrically. It is fabricated from structural steel shapes and cold formed steel girts and is factory sheeted with a minimum of 16-gauge flat sheeting.
| ADDITIONAL INFORMATION | |
|---|---|
| Electrical Control Panel: | Pre-wired electrical control panel with pushbutton station. |
| Counterweighted: | Counterweight assembly with enclosure tower supports vertical movement and door stacking. |
| Operator: | Secure operating movement with either the overhead mounted or floor mounted operator. Manual disconnect also available for power failure situations. |
| Construction: | Door framing shall be structural steel tube with 16-gauge minimum flat sheet steel on the exterior and interior faces. All frames and framing members shall be true to dimension and square in all directions and no door shall be bowed, warped, or out of line in the vertical or horizontal plane of the door opening by more than 1/8 inch in 20 feet. Exposed welds and welds which interfere with the installation of various parts shall be ground smooth and flush. |
| Door Finish: | Manufacturer’s standard, factory-applied primer paint. |